KIPP Indexing plungers with tapered pin, premium Metrický jemný závit Ocel 5.8, plastová rukojeť Černý oxid

Artikelnummer
Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Info	Material: Steel grade 5.8 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and black oxidized.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping. The conical contact surface is aligned by the threaded sleeve and locking nut.
HS kód	Bekijk
Bekijk alle specificaties

Specificaties

Značka	Kipp
Třída	5.8
Materiál	Ocel
Povrchová úprava	Black Oxide
Info	Material: Steel grade 5.8 Mushroom knob black grey thermoplastic.Version: indexing pin hardened, ground and black oxidized.Note: Premium indexing plungers are characterized by more stringent manufacturing requirements for the indexing plungers and threaded sleeve. In addition, a centering locator that can be used to increase the positioning accuracy is provided on the threaded sleeve. These indexing plungers are used when it is necessary to prevent shifting of the locked position by transverse forces and greater positioning accuracy is required. A new locking position can only be set after the pin has been manually disengaged. When high lateral forces are to be expected, the centering locator should be used.Assembly: When using the threaded sleeve centering, it is recommended the receiving reamed hole be machined before tapping. The conical contact surface is aligned by the threaded sleeve and locking nut.
HS kód	Bekijk

Voor dit product zijn geen downloads beschikbaar.

Producten ({0})

Toon alle varianten

Artikelnummer Uw artikelnummer	Specificaties	Voorraad	Netto prijs	Prijs per	Hoeveelheid

	Voorraad	Netto prijs		Aanmelden Vorige

Geen resultaten gevonden