text.skipToContent text.skipToNavigation

Závitořezný šroub s válcovou vypouklou s křížovou drážkou DIN 7516 AE-H Ocel Pozinkované

Previous Next
Artículo No.
Značka Fabory
Typ drážky Phillips
Tvar hlavy S vypouklou válcovou hlavou
Materiál Ocel
Povrchová úprava Pozinkované
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.
HS kód
Ver todas las especificaciones
Ver todas las variantes

Especificaciones

Značka Fabory
Typ drážky Phillips
Tvar hlavy S vypouklou válcovou hlavou
Materiál Ocel
Povrchová úprava Pozinkované
Info
  • The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests.
  • The engagement depth should by no means exceed twice the nominal screw diamerter.
    • Warning: electroplating of these products may cause hydrogen embrittlement.
HS kód

Estándares

DIN 7516-AE H

Productos ({0})

  Stock Precio neto   Regístrate
No cierre esta página. Este mensaje desaparecerá cuando la página esté completamente cargada.