Stud metal end ≈ 1,25d BSW Steel Plain 5.6

Artículo No.
Brand	Fabory
Class	5.6
Material	Steel
Thread direction	Right
Surface treatment	Plain
Info	Depending on availability, class 5.8 can be supplied instead of class 5.6. Whitworth thread (BSW) is not internationally recommended. It is advised to use metric (M) thread instead. ATTENTION: when ordering these studs the proper designation is d x L, e.g. stud 5/16X25, where the working length L = 25 mm and the thread length on the metal end e = 10 mm. The overall length of the stud is 25 + 10 = 35 mm. The thread length on the nut end b = 18 mm. The thread on the metal end is made with a "transition fit", which prevents loosening of the metal end of the studs during disassembly. These studs, with a metal end ≈1,25d, have many applications, but are mainly intended for use in cast iron counterparts.
Commodity code	Ver
Ver todas las especificaciones

Especificaciones

Brand	Fabory
Class	5.6
Material	Steel
Thread direction	Right
Surface treatment	Plain
Info	Depending on availability, class 5.8 can be supplied instead of class 5.6. Whitworth thread (BSW) is not internationally recommended. It is advised to use metric (M) thread instead. ATTENTION: when ordering these studs the proper designation is d x L, e.g. stud 5/16X25, where the working length L = 25 mm and the thread length on the metal end e = 10 mm. The overall length of the stud is 25 + 10 = 35 mm. The thread length on the nut end b = 18 mm. The thread on the metal end is made with a "transition fit", which prevents loosening of the metal end of the studs during disassembly. These studs, with a metal end ≈1,25d, have many applications, but are mainly intended for use in cast iron counterparts.
Commodity code	Ver

DIN	939

Para este producto no hay documentos disponibles para descargar.

Artículo No. Su Artículo No.	Especificaciones	Stock	Precio neto	Precio por	Cantidad

	Stock	Precio neto		Regístrate Anterior

No se encontraron resultados para este filtro.