text.skipToContent text.skipToNavigation

fischer Highbond anchor FHB II-A S M12 x 75/100 gvz


Article number 97275FIS
Průměr
Design S cvočkovým koncem
Délka (m) 207
Velikost závitu (metrická) 12
Průměr vrtaného otvoru (mm) 12
Efektivní hloubka ukotvení (mm) 75
S pryskyřičnou kapslí Ne
View all specifications
Packed per 1

Specifications

Průměr M12
Design S cvočkovým koncem
Délka (m) 207
Velikost závitu (metrická) 12
Průměr vrtaného otvoru (mm) 12
Efektivní hloubka ukotvení (mm) 75
S pryskyřičnou kapslí Ne
Značka Fischer
Materiál Ocel
Váha kusu (g) 158.25
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
HS kód

Article numbers

Article number 97275FIS
EAN 4006209972755
UBB 500616708524
UNSPSC 31162101
Manufacturer article nr  97275
Do not close this page. This message will disappear, when the page is fully loaded.