text.skipToContent text.skipToNavigation

Fischer fbn ii 16/100 (16x218) gs zp bolt anchor


Artikelnummer 45588FIS
Diameter
Lungime
Lățimea cheii (mm) 24
Lungime (m) 218
Dimensiunea filetului (metric) 16
Diametrul găurii de găurire (mm) 16
Număr de șaibe 1
Bekijk alle specificaties
Verpakt per 10
Alleen volledige verpakkingen

Specificaties

Diameter M16
Lungime 164 mm
Lățimea cheii (mm) 24
Lungime (m) 218
Dimensiunea filetului (metric) 16
Diametrul găurii de găurire (mm) 16
Număr de șaibe 1
Dispoziție de fixare Piuliţă
Contravântuiri Ancoră împărțită
Număr de piulițe 1
Instalare prin împingere Da
Instalare prepoziționată Da
Instalare distanțată Nu
Grosimea maximă de strângere (mm) 100
Ancoră de protecție a suprafeței Zincat galvanic/electrolitic
Cu guler Nu
Fixare cu unealta de expansiune Nu
Model de ancorare Filet exterior
Marcă Fischer
Caracteristici cheie Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Aprobare ETA Yes
Greutate pe bucată (g) 399.52
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Codul mărfurilor

Artikelnummers

Artikelnummer 45588FIS
EAN 4006209455883
UBB 500616649629
UNSPSC 31162101
Fabrikant artikelnummer 45588
Sluit deze pagina niet. De melding verdwijnt zodra de pagina klaar is met laden.