fischer bolt anchor FBN II 12/10 hot-dip galvanised

Položka č.	507589FIS
Diameter
Length
Wrench width (mm)	19
Thread length (mm)	59
Min. drill hole depth (mm)	95
Length (m)	106
Thread size (metric)	12
Pozrite si všetky špecifikácie

Ambalat la 1

Technické údaje

Diameter	M12
Length	59 mm
Wrench width (mm)	19
Thread length (mm)	59
Min. drill hole depth (mm)	95
Length (m)	106
Thread size (metric)	12
Drill hole diameter (mm)	12
Number of washers	1
Fastening provision	Nut
Bracing	Split anchor
Number of nuts	1
Push-through installation	Yes
Pre-positioned installation	Yes
Spaced installation	No
Max. clamping thickness (mm)	10
Surface protection anchor	Hot-dip galvanized
With collar	No
Fastening by expander tool	No
Anchor model	External thread
Brand	Fischer
Material	Steel
Weight per piece (g)	99.72
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	Zobraziť

Stiahnuť ako PDF Vytlačiť

Stiahnuť ako PDF Vytlačiť