Conical seat DIN 6319 D Stal nierdzewna A4 type D

Numer artykułu
Marka	Fabory
Materiał	Stal nierdzewna
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.type D
Kod towaru	Widok
Zobacz wszystkie specyfikacje

Specyfikacje

Marka	Fabory
Materiał	Stal nierdzewna
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.type D
Kod towaru	Widok

DIN	6319-D

Numer artykułu Twój kod artykułu	Specyfikacja	Stan magazynowy	Cena netto po rabacie	Cena za	Ilość

	Stan magazynowy	Cena netto po rabacie		Zapisz się Poprzedni

Dla wybranego filtra nie znaleziono żadnego wyniku