fischer Highbond anchor FHB II-A L M12 x 100/10 gvz

Artículo No.	506893FIS
Diameter
Design	With stud end
Length (m)	142
Thread size (metric)	12
Drill hole diameter (mm)	14
Effective anchorage depth (mm)	100
With resin capsule	No
Ver todas las especificaciones

Embalado por 1

Especificaciones

Diameter	M12
Design	With stud end
Length (m)	142
Thread size (metric)	12
Drill hole diameter (mm)	14
Effective anchorage depth (mm)	100
With resin capsule	No
Brand	Fischer
Material	Steel
Weight per piece (g)	124.08
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	Ver

Descargar como PDF Imprimir

Descargar como PDF Imprimir