fischer Highbond anker FHB II-A S M10 x 75/60 ev

Numéro d'article	506886FIS
Diameter
Uitvoering	Met draadeind
Lengte (m)	161
Draadmaat (metrisch)	10
Boorgatdiameter (mm)	10
Effectieve verankeringsdiepte (mm)	75
Met mortelpatroon	Nee
Voir toutes les spécifications

Emballé par 10

Boîte complete uniquement

Spécifications

Diameter	M10
Uitvoering	Met draadeind
Lengte (m)	161
Draadmaat (metrisch)	10
Boorgatdiameter (mm)	10
Effectieve verankeringsdiepte (mm)	75
Met mortelpatroon	Nee
Merken	Fischer
Materiaalsoort	Staal
Gewicht per stuk (g)	86.67
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
HS- en goederencode	Voir

Télécharger en PDF Imprimer

Télécharger en PDF Imprimer