text.skipToContent text.skipToNavigation

fischer bolt anchor FBN II 12/50 hot-dip galvanised


Article number 507592FIS
Diameter
Length
Wrench width (mm) 19
Thread length (mm) 99
Min. drill hole depth (mm) 135
Length (m) 146
Thread size (metric) 12
View all specifications
Packed per 1

Specifications

Diameter M12
Length 99 mm
Wrench width (mm) 19
Thread length (mm) 99
Min. drill hole depth (mm) 135
Length (m) 146
Thread size (metric) 12
Drill hole diameter (mm) 12
Number of washers 1
Fastening provision Nut
Bracing Split anchor
Number of nuts 1
Push-through installation Yes
Pre-positioned installation Yes
Spaced installation No
Max. clamping thickness (mm) 50
Surface protection anchor Hot-dip galvanized
With collar No
Fastening by expander tool No
Anchor model External thread
Brand Fischer
Key features Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
Material Steel
Weight per piece (g) 129.59
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code

Article numbers

Article number 507592FIS
EAN 4048962087734
UBB 500616669346
UNSPSC 31162101
Manufacturer article nr  507592
Do not close this page. This message will disappear, when the page is fully loaded.