fischer High performance anchor FH II 15/10 H with domed nut

Numéro d'article	44908FIS
Diameter
Wrench width (mm)	17
Length (m)	115
Thread size (metric)	10
Drill hole diameter (mm)	15
Number of washers	0
Fastening provision	Nut
Voir toutes les spécifications

Emballé par 1

Spécifications

Diameter	M10
Wrench width (mm)	17
Length (m)	115
Thread size (metric)	10
Drill hole diameter (mm)	15
Number of washers	0
Fastening provision	Nut
Bracing	Split anchor
Effective anchorage depth (mm)	70
Number of nuts	0
Push-through installation	Yes
Spaced installation	No
Max. clamping thickness (mm)	10
With collar	No
Anchor model	External thread
Brand	Fischer
Weight per piece (g)	135.088
Info	d_o= Nominal diameter of drill bit. Min. t_d= Recommended drilling depth. h_ef= Effective anchorage depth. t_fix= Grip range. s = Width across flats. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.
Commodity code	Voir

Télécharger en PDF Imprimer

Télécharger en PDF Imprimer